Premium Line 186110305 Patch Cord 3M

Premium Line 186110305 SlimLine Patch Cord 3M Cat6 U/UTP

                         the best patch cord

      Category 6 U/UTP SlimLine Patch Cord is using:

RJ45 contacts 50μ inch gold plated
Molded snag proof boot

Compliant with Cat.6 standards as:

ANSI/TIA 568-2.D:2018
ISO/IEC 11801-1 Class E:2017
CENELEC EN 50173-1:2018
CENELEC EN 50288-10-2:2015
IEC 61935-2:2010 (Edition 3.0)
IEC 61156-6:2012

Compliant with safety standards as:

IEC 60332-1-2:2004
RoHS compliant (EU Directive 2011/65/EC)

Patch cable

differs from standard structure cables in that the patch cable is manufactured for flexibility, while the standard cable is solid copper. Since the patch cord is a stranded copper construction, the attenuation (signal loss) is higher in the connecting wires than in solid cable, so shorter lengths should be adhered to.
They are up to 3 inches (76 mm) long, for connecting stacked components or routing signals through the patch hole. As the length increases, the cables are thicker or thicker and are protected from damage
Since the signal is transmitted through a shielded core, each end of the best patch cables is connected to a connector so that the wire can be easily attached.

Premium Line 186110305

always has connectors on both ends. A pigtail is similar to a patch cord and is the informal name given to a cable with a connector at one end and bare wires (or bare fibers) at the other. In the context of copper cables, these cables are sometimes referred to as sharpened patch cords and the unplugged terminal (“pigtail”) is intended to be permanently attached to a component or terminal. Optical fiber pigtails, as opposed to copper pigtails, can be described as a more precise conductor than cable or wire.
A fiber pigtail is a single, short, tightly buffered optical fiber that has a pre-installed optical connector on one end and a length of bare fiber at the other. The end of the fiber strand is stripped and divided into single fibers from a multi-fiber stem.